Rubber Deck
RubberDek is a trowelled down rubber resurfacing product. Due to its flexibility and non-skid features, it is a great solution for surfaces that decorative concrete would not be a canditate for.
Benefits of Rubber Deck
• Offers a non-slip surface over what would normally be a slippery surface when wet.
• Could reduce liability insurance costs for places such as hotels, condos, apartment complex, theme parks, shopping malls, and many others that are normally targets from lawsuits from falls caused by a slippery surface.
• Because of the natural characteristics of rubber being a semi non porous material it does not
allow the growth of fungus and bacteria to penetrate.
• It is non hazardous as defined by OSHA hazard communication standard CFR title 29 part 1910.1200 and the WHMIS Canadian legislation.
• Allows water to penetrate to the existing surface and does not change designated water drainage
flow.
• Bonds to almost any surface, such as wood, tile, concrete, asphalt, stone, metal, aluminum,
brick, chip board, some plastics and much more.
• The product stays stable under extreme weather conditions.
• Can be installed over existing substrates with small separations such as concrete with cracks or
control joints, wood decks, pavers and bricks and still provide a durable safe seamless surface.
• Uses EPDM peroxide cured rubber, which means unlike other sulfur cured and recycled rubber
it will remain softer longer and takes longer for the ultra violet rays to affect its color.
• Offers a wide range of color combinations meeting any customer’s need.
• Could reduce liability insurance costs for places such as hotels, condos, apartment complex, theme parks, shopping malls, and many others that are normally targets from lawsuits from falls caused by a slippery surface.
• Because of the natural characteristics of rubber being a semi non porous material it does not
allow the growth of fungus and bacteria to penetrate.
• It is non hazardous as defined by OSHA hazard communication standard CFR title 29 part 1910.1200 and the WHMIS Canadian legislation.
• Allows water to penetrate to the existing surface and does not change designated water drainage
flow.
• Bonds to almost any surface, such as wood, tile, concrete, asphalt, stone, metal, aluminum,
brick, chip board, some plastics and much more.
• The product stays stable under extreme weather conditions.
• Can be installed over existing substrates with small separations such as concrete with cracks or
control joints, wood decks, pavers and bricks and still provide a durable safe seamless surface.
• Uses EPDM peroxide cured rubber, which means unlike other sulfur cured and recycled rubber
it will remain softer longer and takes longer for the ultra violet rays to affect its color.
• Offers a wide range of color combinations meeting any customer’s need.
FAQ,s
What Is It used for?
Provides a durable, beautiful, soft safety surface over virtually any substrate such as wood, concrete, tile, asphalt, metal, plastic and a lot more.
Ideal for pool decks, patios, walkways, driveways, play areas, splash pads, boats, animal transportation trailers and more.
What is It made of and how is it applied?
It is comprised of the highest quality EPDM Rubber mixed with a specially formulated resin and is trowelled onto virtually any substrate to create a non-slip seamless safe surface. It can be applied at any thickness depending on the substrate or purpose, but for most applications it is installed at a quarter inch thick to provide a durable non-slip comfortable surface to walk on.
How durable is It?
It is virtually indestructible. Weather conditions such as freeze and thaw, humid verses dry or extreme hot and cold climates will not change the properties. In fact, when properly installed, when removed it would require the use of an air chisel, or mechanical floor scraper which in most cases would not only remove the Rubber but would also remove chunks of the existing surface still stuck to the It.
How does this product compare to other resurfacing products?
It is flexible – The nature of this rubber and the specially formulated resin allows for movement in the surface without causing cracking, peeling or flaking.
Temperature changes on substrates such as concrete cause it to expand and contract, which for all other existing top coat products on the market would create movement on the top coat causing cracking, peeling or flaking of the product. It simply flexes with it leaving no adverse effects. Similarly, if control joints are present, other top coats would require to saw cut them back in. With rubber, it is not necessary to leave the control joints open.
How will the finished product look?
Rubber not only offers a safe, softer, non-skid surface, but also creates a beautiful decorative seamless surface. Using a combination of colors along with some basic training techniques will allow you to create
custom borders, designs, and logos creating an individual custom look different for each customer.
How does the surface wear?
Although soft to the touch is a durable hardwearing surface. The easiest explanation would be to think of the tires on your vehicle. The rubber tires not only hold several tons of weight and pressure, but can withstand extreme temperatures from the hot summer days on asphalt to the cold icy conditions of winter.
Provides a durable, beautiful, soft safety surface over virtually any substrate such as wood, concrete, tile, asphalt, metal, plastic and a lot more.
Ideal for pool decks, patios, walkways, driveways, play areas, splash pads, boats, animal transportation trailers and more.
What is It made of and how is it applied?
It is comprised of the highest quality EPDM Rubber mixed with a specially formulated resin and is trowelled onto virtually any substrate to create a non-slip seamless safe surface. It can be applied at any thickness depending on the substrate or purpose, but for most applications it is installed at a quarter inch thick to provide a durable non-slip comfortable surface to walk on.
How durable is It?
It is virtually indestructible. Weather conditions such as freeze and thaw, humid verses dry or extreme hot and cold climates will not change the properties. In fact, when properly installed, when removed it would require the use of an air chisel, or mechanical floor scraper which in most cases would not only remove the Rubber but would also remove chunks of the existing surface still stuck to the It.
How does this product compare to other resurfacing products?
It is flexible – The nature of this rubber and the specially formulated resin allows for movement in the surface without causing cracking, peeling or flaking.
Temperature changes on substrates such as concrete cause it to expand and contract, which for all other existing top coat products on the market would create movement on the top coat causing cracking, peeling or flaking of the product. It simply flexes with it leaving no adverse effects. Similarly, if control joints are present, other top coats would require to saw cut them back in. With rubber, it is not necessary to leave the control joints open.
How will the finished product look?
Rubber not only offers a safe, softer, non-skid surface, but also creates a beautiful decorative seamless surface. Using a combination of colors along with some basic training techniques will allow you to create
custom borders, designs, and logos creating an individual custom look different for each customer.
How does the surface wear?
Although soft to the touch is a durable hardwearing surface. The easiest explanation would be to think of the tires on your vehicle. The rubber tires not only hold several tons of weight and pressure, but can withstand extreme temperatures from the hot summer days on asphalt to the cold icy conditions of winter.
Warranty
It is such a durable product, that when installed following all of the manufactures installation guidelines, we offer a 10 year manufacturer warranty for residential foot traffic, 5 years for commercial foot traffic, and 3 years for light vehicle traffic which is unheard of with any other decorative resurfacing products.